Table of Contents
Advertisement
5.4.5 Check the valve clearance
Checking and adjusting the valve clearance should only be done by professional.
See "Valve" under "Technical Data".
5.4.6 Check starter and alternator
Checking and maintenance work on the starter and alternator should only be done
by professional.
5.4.7 Check cooling system
If the cooling system is functioning normally, the "TEMP" lamp will not be lit up. If the
temperature is too high and the lamp lights up, the cause maybe one of the
following:
Blocked water intake
Defective impeller in sea water pump
Defective thermostat or temperature gauge
Warning: Watch out for water leakage whenever you are working on the cooling
system
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
TD-POWER MARINE
15
Advertisement
Table of Contents
