Using Instructions; Cleaning And Maintenance - Heinner HMP-1340WH Instruction Manual

www.heinner.com
VI. USING INSTRUCTIONS
ASSEMBLING
1. Place the plastic snake into the head tube, long end first, and turn to feed the snake
slightly until it is set into the motor housing.(fig.1)
2. Place the filter traps into the tube around to the plastic snake. (fig.1)
3. Place the plastic cover locking ring into the head tube.(fig.1)
4. Put the filter tip to the plastic cover and fix it.
5. Move the whole head tube clockwise so that it being fastened tightly.(fig.2)
6. Put the plastic juice tray on the top of head tube and make it on the suitable
position.(fig.3)
7. Put the juice cup right near the filter tip, and a cup for tomato sediment.(fig.3)
Now the appliance is ready for juicing.
VII. CLEANING AND MAINTENANCE
1. Before you clean the appliance, switch the appliance off and remove the plug from the
socket.
2. Press the release button and turn the whole cutter housing in the direction of the arrow.
Remove the pusher and the tray.
3. Unscrew the screw ring and remove all parts of the cutter housing. Do not clean the parts
in the dishwasher!
4. Wash all parts, clean them immediately after use.
5. Rinse them with clear water and dry them immediately.
1340W, 50/60Hz, 220-240V
13