Table of Contents
Advertisement
Quick Links
DL5 DS Link Canon TTL Converter Ikelite
CT1 Hotshoe Kit
Product # 46075
Video Tutorial
https://www.ikelite.com/watch-46075
Visit the link above or scan the QR code
to see how to program your DS Link TTL
Converter.
Included in the Box
•
DL5 DS Link Canon TTL Converter # 46074
•
CT1 Canon TTL Hotshoe # 46073
Important Notices
Use of this product with a nickel plated brass (silver
»
colored) sync cord or bulkhead may cause connectors
to permanently seize together. Separate and lubricate
connectors after each day of diving to prevent seizure.
Use of two strobes requires a dual sync cord. Two
»
strobes cannot be controlled by individual converters
even if the housing is equipped with two bulkheads.
Compatible Strobes
•
Ikelite DS160, DS161
•
Ikelite DS125 above serial number 5000
•
Ikelite DS51
•
Ikelite DS50 above serial number 70000
•
Ikelite DS200 above serial number 7163
SEA&SEA, INON, Nikonos, and other Ikelite non-DS
»
strobes are not capable of powering the DL5 DS Link
TTL Converter and are not compatible with this product.
Programming & Settings
Camera
100D Rebel SL1
200D Rebel SL2
250D Rebel SL3
5D II
5D III
5D IV, 5DS, 5DS R
6D
6D II
70D
750D Rebel T6i
77D
7D
7D II
800D Rebel T7i
80D
850D Rebel T8i
90D
M6 II
M50 I, M50 II
R
R5
R6, R6 II
R7
R8
R10
R100
RP
Programming the Converter
1.
Refer to the chart at http://docs.ikelite.com/reference/
ds-link-dl5-canon-chart.pdf to find the correct program
number for your camera model.
2.
Attach a compatible Ikelite DS strobe via sync cord. If
using a dual sync cord, attach a strobe to the coiled cord
without a red band on it.
Press and hold the pushbutton on the DL5 converter.
3.
While holding the button, turn the strobe on. The LED
indicator on the DL5 will blink a blue light. The number
of blinks will indicate the program number currently set.
Factory default is program # 1 (one blink).
Continue to hold the button until the indicator LED blinks
4.
red three times. Keep holding the button as the DL5
cycles through the program settings.
Program
6
6
1
2
2
1
3
1
5
5
5
6
3
5
5
5
7
5
8
4
4
4
5
5
5
8
7
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ikelite 46075
Summary of Contents for Ikelite 46075
- Page 1 • Ikelite DS160, DS161 Attach a compatible Ikelite DS strobe via sync cord. If • Ikelite DS125 above serial number 5000 using a dual sync cord, attach a strobe to the coiled cord •...
- Page 2 It is only possible to toggle between TTL (blue LED) and » ensure proper connection. Manual (red LED) when a camera is connected. The CT1 TTL Hotshoe is only intended for use with » compatible Ikelite brand housings. An incorrectly mounted hotshoe may prevent toggling » between TTL and Manual.
- Page 3 (1) year from the original date of purchase. To obtain warranty service, the product must be returned to Ikelite postage paid. Ikelite will, at its sole discretion, repair or replace such products, and will return to customer postage paid.
Need help?
Do you have a question about the 46075 and is the answer not in the manual?
Questions and answers