Midea MDT24P4AST User Manual page 13

Options enhance the wash cycle. Some Options are available with only
certain Wash Cycles. Refer to the "Cycle and Options Charts" to see
which Options are available for the wash cycle you selected.
•
Press the desired Option control(s). The Option control(s)
illuminates to indicate which option(s) have been selected.
SANITIZE
WARNING: Only sanitizing cycles have been designed to meet the
requirements for soil removal and sanitization efficacy. There is no
intention, either directly or indirectly, that all cycles on a certified
machine have passed the sanitization performance test.
The sanitize option sanitizes dishes and glassware in accordance with
NSF International NSF/ANSI Standard 184 for Residential Dishwashers.
Certified residential dishwashers are not intended for use in licensed
food establishments.
The Sanitize Control illuminates to indicate when the Wash cycle with
the Sanitize option is completed. The light will turn off after the door
has been opened for 30 seconds.
NOTE: It is possible that the dishwasher may not achieve the required
parameters for NSF/ANSI 184, if the temperature of the incoming hot
water does not meet the minimum requirement of 120°F (49°C).
HI TEMP
When the Hi Temp option is selected, the water temperature will be
increased to achieve better results during the wash portion, compared
to the cycle without Hi Temp option.
HEATED DRY
When the Heated Dry option is selected, the heater will work during
the drying process.The Heated Dry process adds time to the wash
cycle.
EXTENDED DRY
When the Extended Dry option is selected, the heater and fan
operation will be extended to further improve drying performance.
The final rinse will be elevated and extend the heated dry time.
d
ADDITIONAL FEATURES
DELAY
The Delay Time feature allows you to program the dishwasher to begin
the selected wash cycle 2, 4 or 8 hours later.
Press the DELAY control repeatedly to toggle between (2h / 4h / 8h).
The LED next to the selected time will illuminate.
NOTE: To cancel the Delay feature, press and hold the START control
for 3 seconds to Cancel. To begin the wash cycle immediately, press
START again.
CTL LOCK (Control Lock)
The Control Lock feature locks all controls to avoid unintentionally
changing the dishwasher cycle or starting the dishwasher. The
QUICK and RINSE next to Control Lock will illuminate to indicate the
Control panel is locked.
13