NEC Cinema NP-NC1503L User Manual page 7

Table of Contents

Advertisement

Label Information
About the laser module used in the light source
• This product has a built-in laser module. Control and adjust-
ment procedures other than those described in this document
may result in exposure to hazardous laser radiation.
• This product is classified as a Class 1 of Laser Product Safety
Standard JIS C 6802: 2018, IEC 60825-1 3rd Edition: 2014.
This product is classified as Risk Group 3 of IEC/EN 62471-5
1st Edition: 2015.
• This product complies with performance standards for laser
products under 21 CFR Part 1040 except with respect to those
characteristics authorized by Variance Number 2015-V-3435
effective on April 7 2016.
[Overview of the built-in laser]
Wave length: Red 635-647 nm, Blue 449-471 nm
Maximum power: Red 43 W, Blue 636 W
The explanatory label of the laser product is put on the top of the
projector.
CLASS 1 LASER PRODUCT
WARNING RG3 PRODUCT
• No direct exposure to the beam shall be permitted.
• Do not look into the projector's lens. Serious damage to your
eyes could result.
• Not for household use.
• Operators shall control access to the beam within the hazard
distance and install the product at the height that will prevent
exposures of spectators' eyes within the hazard distance.
Label A: Laser Explanatory and Risk Group / Lamp
Label A
Important Information
Safety Label
7

Advertisement

Table of Contents
loading

Table of Contents