Table of Contents
Advertisement
2.2
Intended use
This device is a sensor unit for decentralized flush-mounted installation. The sensor unit can be
assigned to an available switch actuator. The devices serve for switching processes and are not
pre-programmed.
The device is intended for the following:
Operation according to the listed technical data
■
Installation in dry interior rooms and suitable flush-mounted boxes
■
Use with the connecting options available on the device
■
The intended use also includes adherence to all specifications in this manual.
2.3
Improper use
Each use not listed in Chapter 2.2 "Intended use" on page 5 is deemed improper use and can
lead to personal injury and damage to property.
Busch-Jaeger is not liable for damages caused by use deemed contrary to the intended use of
the device. The associated risk is borne exclusively by the user/operator.
The device is not intended for the following:
Unauthorized structural changes
■
Repairs
■
Outdoor use
■
The use in bathroom areas
■
2.4
Target group / Qualifications of personnel
Installation, commissioning and maintenance of the device must only be carried out by trained
and properly qualified electrical installers.
The electrical installer must have read and understood the manual and follow the instructions
provided.
The electrical installer must adhere to the valid national regulations in his/her country governing
the installation, functional test, repair and maintenance of electrical products.
The electrical installer must be familiar with and correctly apply the "five safety rules" (DIN VDE
0105, EN 50110):
1. Disconnect
2. Secure against being re-connected
3. Ensure there is no voltage
4. Connect to earth and short-circuit
5. Cover or barricade adjacent live parts
Product manual 2CKA001473B9189
Safety
│5
Advertisement
Table of Contents
