Table of Contents
Advertisement
6.3.1
Parameter settings of 1gang sensor unit
Sensor settings
Fig. 15:
Sensor settings
Rocker settings
Fig. 16:
Rocker settings
The following parameter is available immediately for pre-programmed devices.
Product manual 2CKA001473B9189
Commissioning
[1] Changing the name
[2] Deleting the channel
[3] Selecting the rocker in the list view
[1] Changing the name
[2] Switching of the sensor via the button
[3] Setting the LED night/day switch-on
brightness in % via the -/+ buttons
–
The parameter specifies how
strong the LED lights up
percentage wise during night/day.
[4] Selecting the LED operating mode:
Light for orientation: LED lights
■
up permanently
Status display: LED lights up
■
during actuation
│24
Advertisement
Table of Contents
