Stealth Cam STC-AD2 User Manual page 40

Viewing the images on your computer using the provided software
Please refer to Installation section on above to install the
software and application program properly.
•
Slide the power switch to test location.
•
To view the images simply plug one end of the USB cable into
an available USB port on your computer.
•
Plug the other end of USB cable into the camera. The camera
will automatically power ON and display a USB icon on the
LCD screen.
•
At the same time, your computer will recognize the camera as
mass storage device and found under MY COMPUTER.
www.stealthcam.net
STC-AD2 / STC-AD2RT
Toll Free 877-269-8490
40