•
Select the desired coverage distance. (see
on page 24 for reference.)
Tes
ting the camera coverage
One of STC-AD2 / STC-AD2RT Cam's many features is the
ability to test the coverage area
•
After mounting the camera, open front housing and slide th
power toggle switch to TEST.
•
Close the front housing.
•
Walk around in the front of the
mounted camera in the p
on the front will blink on when you have intruded the cover
area.
•
Adjust the camera position as needed and repeat testing until
the des
ired coverage area is achieved.
www.stealthcam.net
STC-AD2 / STC-AD2RT
area
.
camera to see if you have
roper position. A green indicator light
Toll Free 877-269-8490
PIR Coverage Diagram
e
age
28