Advertisement
ELX200 Full-Range Loudspeaker Accessories
5.
Mounting a U-Bracket to the wall or ceiling
The U-Bracket is used to mount a loudspeaker to the wall or ceiling.
Caution!
We recommend that two or more persons lift and place heavier loudspeakers. Single person
!
lift and placement of heavier loudspeakers could cause injury.
U-Bracket mounting options
A: For wall mounting with bolts (3/8" or M10 bolts) OR pole/truss mounting with U-bolts (2"
or M10 U-bolt) (4 PLS)
B: For ceiling mounting with threaded rods (1/2" or M16 threaded rods) (2 PLS)
C: For ceiling mounting with U-bolt (4" or M16 U-bolt) (2 PLS)
D: For ceiling mounting with threaded rods (3/8" or M10 threaded rods) (2 PLS)
Electro-Voice
Using the four screws you removed from the top handle, attach the upper mount (B) to a
15 inch loudspeaker where the top handle was located in the down position.
A
C
ELX200-10/10P
Using the four screws you removed from the bottom handle, attach the lower mount (D)
to a 12-inch or 15-inch loudspeaker where the bottom handle was located in the up
position.
OR
Using the four screws you removed from the bottom handle, attach the lower mount (C)
to a 10 inch loudspeaker where the bottom handle was located in the down position.
A
B
A
D
ELX200-12/12P
C
D
Installation note
Installation | en
B
D
ELX200-15/15P
2023-08 | 04 | F.01U.332.445
9
Advertisement
