File Management - Televes DigiMod 554902 User Manual

Dvb-t encoder/modulator & usb
Table of Contents

Advertisement

LCN
If you want to add LCN please select the "ADD LCN" option.
Service ID - Set the same value that was previously edited.
Logical Channel Number -Set the LCN value that you want.
Visible Service Flag - Please Enable or disable this option.
Logical Channel Nunber Length - Please select between 10bit or 14bit.
At the end, select the "Add" option
After setting all the parameters, click
"OK" when it prompts "The operation completed normally. "
Click this button to stop the transformation before the operation
completed.
After fi nishing the transform operation, users can click this button to
play the generated TS video.
Set the "Private Data" value of your coun-
try. If your country not use this parame-
ter, set this value to: "0".
For example in UK is necessary to edit the
value to: 9018.
To set the interval value.
To set the resolution for the output
video.
The video is transformed based on VBR
(Variable Bit Rate). The number set here
represents the highest bit rate for the
output video and bit rate will varies
under the number.
Users can select a encode format here
according to the standart of receiving
terminal.
Users can fi lter the null packet to boost
the video´s eff ect bit rate.
A single video can be maximum 2.0 GB in
size. (DIGIMOD cannot play bigger than
2GB)
to start the transformation. Click

4.3 File Management

After fi nishing the transformation, users can fi nd out the videos fi les generated
according the Saving Directory. For example, we save the video in "D:\VIDEOS_
DIGIMOD" so we can fi nd it in Disk D\Folder VIDEOS_DIGIMOD.
Management:
1.
Three fi les will be generated if the Null Packet has been fi ltered.
FinalOutput.ts
FinalOutput_204_0.ts
FinalOutput_204_0.tsinfo
2.
Two fi les will be generated if the Null Packet has not been fi ltered.
FinalOutput.ts
FinalOutput_0.ts
Remarks:
All the fi les names are automatically generated.
Rename the fi les before creating a new video to avoid covering the previous
fi les.
If you rename "FinalOutput-204-0.ts" or "FinalOutput-204-0.tsinfo", always
keep the names the same (Extension excluded) and then 554912 can read
them and play the video.
11
TS video for preview though the
"Creator" interface by clicking "Play"
button
TS video and information fi les:
Users need to save the two fi les
together in the USB memory, and
then 554912 can read them and
play the video.
TS video for preview though the
"Creator" interface by clicking "Play"
button
TS video: Users need to save it in
the USB memory, and then 554912
can read them and play the video.
EN

Advertisement

Table of Contents
loading

Table of Contents