FLIR EXTECH INSTRUMENTS DL150 User Manual page 4

Description and Button Functions
1. LCD Description
:
:
:
:
:
:
:
:
:
This Manual: http://www.manuallib.com/file/2693250
Normal record mode is selected
Capture record mode is selected. Records the sine
wave when the measure value exceeds the Capture
Detection set level.
Auto power off setting, the meter will automatically
shuts off after 5mins without any button presses.
Average peak measure and record mode selected
(about 195ms)
Recording status. After the record mode is set up by the software, press the
START/STOP button for more than 4 seconds to begin recording. This icon will be
displayed and indicates the meter is recording data. Press the same button again for
more than 4 seconds to stop recording.
Record until full is selected. When the memory is full, the datalogger will stop recording.
Continuous recording is selected. When the memory is full, the data will overwrite the
oldest data.
Memory full and recording has stopped.
Battery sign, when display completely the battery power is full. When there is only a
frame icon displayed, the battery is exhausted and should be replaced with a new one.
3 DL150-EU-EN-V2.4-3/12