Samsung WD80M4B5 Series User Manual page 54

Troubleshooting
Problem
HC
1C
8C
AC
AC6
If any information code keeps appearing on the screen, contact a local Samsung service
centre.
54 English
WD80M4B53JW_03881C-01_EN.indd 54
High temperature heating check
• If the information code remains, contact a customer service
centre.
The WaterLevel sensor is not working properly.
• Try power off and restarting the cycle.
• Check WaterLevel Sensor wire harness.
• If the information code remains, contact a customer service
centre.
NOTE
When the washer displays the "1C" code, the washer do
draining for 3 minutes. During this time, the Power button is
inoperative.
The MEMS sensor is not working properly.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service
centre.
Check communications between main and sub PBAs.
• Try power off and restarting the cycle.
• If the information code remains, contact a customer service
centre.
Check communications between main and inverter PBAs.
• Depending on the state, the machine may automatically returns
to normal operation.
Turn the machine off, and restart the cycle.
•
• If the information code remains, contact a customer service
centre.
Action
2018/3/8 9:43:22