LG 27HK510S-W.ATR Owner's Manual page 19

[Picture]
1
Press to activate the LED Control Button. When the LED Control Button is activated, press
2
Among the LED Control Button, press
3
Configure the options following the instructions that appear in the bottom right corner.
4
To configure an upper menu or another item, press the LED Control Button
5
In order to exit from the OSD Menu, press the LED Control Button
The applicable setting options are as shown below.
[All Settings] > [Picture]
[Custom]
[Picture Mode]
[Mono]
[sRGB]
[EBU]
[REC709]
[SMPTE-C]
[DICOM]
[Calibration 1]
[Calibration 2]
NOTE
• The [Brightness Stabilization] function is operated in [Custom].
• [Calibration 2]: If you use Calibration after installing the
to move to the left or right or
or press
or press .
Allows the user to adjust each element. The color mode of the main menu can be adjusted.
Mono (black and white) color mode.
The standard RGB color mode for monitors and printers.
The standard TV PAL color mode for broadcasting.
The standard HDTV color mode for broadcasting.
The standard TV NTSC color mode for broadcasting.
A mode that optimizes the screen settings so you can view images for medical use.
Configures to the last calibrated (corrected) screen.
Configures to a previously calibrated (corrected) screen.
program, the applicable menu will be activated.
and select [All Settings] to show the complete OSD Menu.
to move to the bottom or top to go to the [Picture].
to move to the settings.
Explanation
19