Table of Contents
Advertisement
•
To use the USB upstream/downstream function:
»
Upstream: Use an USB Type-C cable and plug on end of the Type-C
connector to the monitor's USB 3.2 Type-C port as upstream and the other
end to your computer's USB Type-C port. Or use an USB Type-C to Type-A
cable, plug the Type-C connector to the the monitor's USB 3.2 Type-C port
as upstream and the Type-A connector to your computer's USB Type-A
port. Make sure your computer is installed with the latest Windows 10/11
operating system. That will enable the USB ports on the monitor to work.
»
Downstream: Use an USB cable to connect your device with the monitor's
USB Type-A port.
When these cables are connected, you can choose the desired signal from the
Input Select item in the OSD menu.
2.5
Turning on the monitor
Set the AC switch to ON position (A), and then press the
1-3 for the location of the Power button. The power indicator lights up in white to
show that the monitor is ON.
ASUS PA27DCE OLED Monitor
A
B
button (B). See page
2-7
Advertisement
Table of Contents
