ASROCK X570 TAICHI User Manual page 89

Load XMP Setting
Load XMP settings to overclock the memory and perform beyond standard
specifications.
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) inserted
and assign the appropriate frequency automatically.
DRAM Voltage
Configure the voltage for the DRAM Voltage.
Infinity Fabric Frequency and Dividers
AMD Overclocking Setup Set Infinity Fabric frequency (FCLK). Auto: FCLK = MCLK.
Manual: FCLK must be less than or equal to MCLK for best performance in most cases.
Latency penalties are incurred if FCLK and MCLK are mismatched, but sufficiently high
MCLK can negate or overcome this penalty.
GFX Clock Frequency
(Only for processor with integrated graphics)
This item allows you to alter the frequency for the GFX clock frequency. After you
alter the GFX Clock Frequency settings, make sure to adjust the GFX Core Voltage
settings.
*The adjustable range is dependent on the CPU being installed.
GFX Core Voltage
(Only for processor with integrated graphics)
This item allows you to alter the voltage for the GFX Core Voltage.
*The adjustable range is dependent on the CPU being installed.
DRAM Timing Configuration
External Voltage Settings and Load-line Calibration
CPU Core/Cache Voltage
Input voltage for the processor by the external voltage refulator.
CPU Core/Cache Load-Line Calibration
CPU Core/Cache Load-Line Calibration helps prevent CPU voltage droop when the system
is under heavy loading.
CPU VCORE Switching Frequency
Configure CPU VCORE Switching Frequency.
82