Table of Contents
Advertisement
12
WATCHING TV
Freeze Mode
can freeze the image shown on the TV screen for 5 minutes.
Press FREEZE to freeze the image.
Freeze
• The sound output will not be paused.
• To cancel freeze mode, press any buttons except y.
Sleep Timer
can set the unit to go into standby mode after an incremental period of time.
Press SLEEP repeatedly to change the amount of time (increases
the time by 30 minutes up to 120 minutes).
Press SLEEP once to call up the display for checking the remaining time.
• To cancel sleep timer, press SLEEP repeatedly until [Sleep Off] is
displayed.
Sound Functions
well as the volume.
Volume Adjustment
Use VOL +/− to adjust the volume.
Volume
30
will be displayed for a few seconds when adjusting the volume.
Silence Mode
Press MUTE
• Press MUTE
Switching Audio Mode
ATSC
Press SAP repeatedly to cycle through the available audio languages.
• Available languages differ depending on the broadcast.
• [Other] is displayed when the audio language cannot be
acquired, or the acquired languages are other than English,
Spanish or French.
NTSC
Press SAP to display the currently selected audio mode.
While receiving an MTS broadcast, press repeatedly to cycle through
the available audio channel.
e.g.) When all audio are available
SAP
/ STEREO
SAP
SAP /
STEREO
describe how to change the audio or the audio language as
to turn off the sound temporarily.
will be displayed for a few seconds.
Mute
again or VOL +/− to recover the original
volume.
STEREO : Outputs stereo-audio
/ MONO
SAP
: Outputs second audio program
MONO
: Outputs mono-audio
Sleep
120min.
11.1
English 1/3
11
SAP
/ STEREO
Advertisement
Table of Contents
