Download Print this page
Eterna HDP165 Installation Instructions

Eterna HDP165 Installation Instructions

1650w automatic hand dryer

Advertisement

Quick Links

EVENTUALLY, YOU MAY WANT TO
REPLACE THIS PRODUCT:
Regulations require the recycling of Waste from
Electrical and Electronic Equipment (European
"WEEE Directive" effective August 2005—UK
WEEE Regulations effective 2nd January 2007).
Environment Agency Registered Producer: WEE/
GA0248QZ.
WHEN YOUR PRODUCT COMES TO THE END OF
ITS LIFE OR YOU CHOOSE TO REPLACE IT, PLEASE
RECYCLE IT WHERE FACILITIES EXIST - DO NOT
DISPOSE WITH HOUSEHOLD WASTE.
Email: sales@eterna-lighting.co.uk / technical@eterna-lighting.co.uk
www.eterna-lighting.co.uk
Visit our website:
Issue 0816
CLEANING:
Clean this fitting only with a soft dry cloth.
Do not use any chemical or abrasive cleaners.
IF YOU EXPERIENCE PROBLEMS:
If you believe your product is defective, please return
it to the place where you bought it. Our Technical
Team will gladly advise on any Eterna Lighting
product, but may not be able to give specific
instructions regarding individual installations.
Made in China
INSTALLATION INSTRUCTIONS
A guide for qualified electricians
Model:
Pack contents:
1 x Fitting
HDP165
1 x Fixing pack
1650W Automatic Hand Dryer
These instructions are provided as a guideline to assist you.
PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION
AND RETAIN FOR FUTURE REFERENCE

Advertisement

loading
Need help?

Need help?

Do you have a question about the HDP165 and is the answer not in the manual?

Questions and answers

Summary of Contents for Eterna HDP165

  • Page 1 If you believe your product is defective, please return GA0248QZ. it to the place where you bought it. Our Technical Model: Team will gladly advise on any Eterna Lighting WHEN YOUR PRODUCT COMES TO THE END OF Pack contents: ITS LIFE OR YOU CHOOSE TO REPLACE IT, PLEASE...
  • Page 2 08. Restore the power and switch on. have intended it. Eterna Lighting cannot accept 173mm made. After you have completed your installation any liability for loss, damage or premature failure there are electrical tests that should be carried out: resulting from inappropriate use.