Advertisement
Quick Links
SPECIFICATION:
Voltage:
240V / 50Hz
Rated power:
1800W
Current:
8.0A
Ingress protection:
IPX1
Volume of air movement:
2.6m³/min
Dimensions:
240x265x195mm
Unit Weight:
3.75 kg
CLEANING:
Disconnect the power and clean the exterior only of
this fitting with a moist (not wet) cloth.
Do not use any chemical or abrasive cleaners.
Email: sales@eterna-lighting.co.uk / technical@eterna-lighting.co.uk
www.eterna-lighting.co.uk
Visit our website:
Issue 0521
EVENTUALLY, YOU MAY WANT TO
REPLACE THIS PRODUCT:
Regulations require the recycling of Waste from
Electrical and Electronic Equipment (European
"WEEE Directive" effective August 2005—UK
WEEE Regulations effective 2nd January 2007).
Environment Agency Registered Producer: WEE/
GA0248QZ.
WHEN YOUR PRODUCT COMES TO THE END OF
ITS LIFE OR YOU CHOOSE TO REPLACE IT, PLEASE
RECYCLE IT WHERE FACILITIES EXIST - DO NOT
DISPOSE WITH HOUSEHOLD WASTE.
IF YOU EXPERIENCE PROBLEMS:
If you believe your product is defective, please return
it to the place where you bought it. Our Technical
Team will gladly advise on any Eterna Lighting
product, but may not be able to give specific
instructions regarding individual installations.
Made in China
INSTALLATION INSTRUCTIONS
A guide for qualified electricians
Pack contents:
Model:
1 x Hand dryer
1 x Fixing kit
HDA-1800
1800W High Performance Automatic Hand Dryer
These instructions are provided as a guideline to assist you.
PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION
AND RETAIN FOR FUTURE REFERENCE
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Eterna HDA-1800
Summary of Contents for Eterna HDA-1800
- Page 1 (not wet) cloth. it to the place where you bought it. Our Technical Do not use any chemical or abrasive cleaners. Team will gladly advise on any Eterna Lighting product, but may not be able to give specific Pack contents: instructions regarding individual installations.
- Page 2 After you have completed your installation there it. Eterna Lighting cannot accept any liability for are electrical tests that should be carried out: these loss, damage or premature failure resulting from tests are specified in the Wiring Regulations (BS7671) inappropriate use.
Need help?
Do you have a question about the HDA-1800 and is the answer not in the manual?
Questions and answers