Advertisement
Quick Links
Cleaning:
>
Disconnect the power and clean the exterior only of this fitting with a moist ( not wet ) cloth.
>
Do not use any chemical or abrasive cleaners.
Specification:
Voltage:
240V 50 Hz
Rated Power:
1800W
Current:
8.0A
Ingress protection:
IPX1
Volume of air movement: 2.6m³/min
Dimensions:
250 x 225 x 195 mm
Unit Weight:
3.75 kg
Eventually, you may want to replace this light fitting:
When your light fitting comes to the end of its life or you choose to update or upgrade it by
replacing it, please do not dispose of it with your normal household waste, please recycle
where facilities exist. When you need to dispose of this fitting, check with your retailer or
local authority for suitable options. New regulations require the recycling of Waste from
Electrical and Electronic Equipment ( European "WEEE Directive" effective August 2005—
UK WEEE Regulations effective 2nd January 2007 ).
Environment Agency Registered Producer: WEE/GA0248QZ
If you experience problems:
If your Hand dryer is defective or develops a fault, please return it to the place where you bought it. You
can call our Helpline for advice. The Helpline will gladly give advice on any aspect of any Eterna
Lighting product but may not be able to give specific instructions regarding individual installations.
If in doubt, consult a qualified electrician.
Help line:
Tel: 01933 673 144
Fax: 01933 678 083
For answers to frequently asked questions ( FAQs ) and other information visit our web-site
www.eterna-lighting.co.uk
Email: sales@eterna-lighting.co.uk
1.8KW Automatic
Hand Dryer
Model(s)
HDA-1800
Pack contents:
Hand dryer
1
Fixing kit
1
PLEASE READ THESE INSTRUCTIONS BEFORE
INSTALLING YOUR NEW FITTING
PLEASE RETAIN FOR FUTURE REFERENCE
- -
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Eterna HDA-1800
Summary of Contents for Eterna HDA-1800
- Page 1 If your Hand dryer is defective or develops a fault, please return it to the place where you bought it. You can call our Helpline for advice. The Helpline will gladly give advice on any aspect of any Eterna Lighting product but may not be able to give specific instructions regarding individual installations.
- Page 2 Installation: accessible to touch. Read this first: > The dryer must be positioned so that 7) Move your hands beneath the sensor to there is at least 0.8m (800 mm) replicate hand drying movement.. The between the air outlet and the surface dryer should operate when you move beneath.
Need help?
Do you have a question about the HDA-1800 and is the answer not in the manual?
Questions and answers