Advertisement
Assembly – Connecting the Power Supply
The TUP500 requires a 24 VDC power source for proper operation. Star recommends use of the PS60A-24B
(pt. no. 30781750) universal power supply.
The PS60A-24B power supply is supplied with a US standard grounded power cord.
The printer end of the power supply cable is the mating Hoshiden connector for the TUP500. Simply connect
the Hoshiden power connection to the TUP500 by sliding back its collar and inserting the power supply's male
connector into the matching female connector on the back of the TUP500. Finally, connect the 3-pronged
power cord to a 110-volt grounded power source.
Note: Be sure the power switch of the TUP500 is switched to the OFF position when connecting the power
supply.
Driver Installation
Driver packages are available for the following platforms:
Windows XP, 2000, VISTA, WEPOS, CE, and XP Embedded
Mac OS X
Linux
1
JavaPOS
OPOS
1. Star's JavaPOS driver is platform independent and is compatible with any operating system that supports the Java Virtual Machine.
Driver Software
A Product CD is not supplied with the printer in the box. Request a CD from your reseller or download and
install the latest version of the Star printer drivers at: www.starmicronics.com.
Windows Driver Installation
Windows Software Package Ver1.0: Star_TUP500_Software_Ver100_20090130.ZIP
Includes: installer, Printer Driver, Configuration Utility, OPOS, JavaPOS (for Windows)
OS: Win2K SP3, XP, Vista 32/64 (does not support configuration tool under 64bit)
Once you download the TUP500 Software package from our website at www.starmicronics.com, run the Star TUP500
installer.exe and follow the menu to proceed with the installation.
Advertisement
