Advertisement
Assembly – Paper Roll Setup
It is necessary to adjust the paper roll holder for the width of the paper you use. If the setting position is incorrect, the paper roll will
be supplied improperly to the mechanism which in turn causes paper transport problems. Thus, it is should be properly adjusted.
The following table shows the paper roll holder
and paper core inner diameter range.
Paper roll Holder
Types
Paper roll Holder (1)
Paper roll Holder (2)
Paper roll Holder (3)
Optional
Note 1) The unit is assembled for 1 inch paper cores
when shipped from the factory. Also, it is set for a
paper width of 82.5 ±0.5 (take-up width of 83 +0.5/-1)
when the printer is shipped from the factory.
"The size of the core
used is related to the
thickness of the paper
Note
Roll Holder Size
1" or 25.4 mm
2" or 50.8 mm
3" or 76.2 mm
Paper Core
Diameter Ranges
25.4 mm ± 1
50.8 mm ± 1
76.2 mm ± 1
used."
Paper Thickness
65 to 100 µm
100 to 150 µm
100 to 150 µm
Advertisement
