Advertisement
Assembly – Paper Roll Setup Continued
Once the paper roll holder is properly configured
for the roll to be used, simply insert the roll holder
into the paper core as show.
Be sure that the cut end of the paper roll is
properly cut to ensure proper paper loading.
To aid in the installation of the paper roll, the TUP500's mechanism is hinged to the base of the printer
allowing the unit to fold open for easier access to the paper inlet path (see below)
Lift handle and pull unit forward.
Position the paper roll as shown.
In this position, it will be much easier to access the
paper inlet for loading of paper.
Slide the cut end of the paper roll into the paper inlet
being careful to feed the paper underneath the
damper rollers.
Advertisement
