Brother MFC-L2680W Quick Setup Manual page 2

6A
Configuration using the CD-ROM (Windows
NOTE:
If the Brother screen does not appear automatically, go to Computer (My Computer).
(For Windows ® 8: click the
Double-click the CD-ROM icon, and then double-click start.exe.
Connection Type
6B
Configuration without using the CD-ROM (Windows
Download the full driver and software package from the Brother Solutions Center.
(For Windows ) solutions.brother.com/windows
®
(For Macintosh) solutions.brother.com/mac
After you download the driver and software package, follow the on-screen instructions until the Connection Type screen appears. Refer to
(Windows ).
®
6C
One-push wireless setup for mobile devices
If your wireless LAN access point/router supports automatic wireless (one-push) setup (WPS/AOSS™), you can set up your machine without using a computer.
Press the WPS or AOSS™ button on your
wireless LAN access point/router.
Print and scan using your mobile device
Download "Brother iPrint&Scan" to start using your machine with mobile devices.
solutions.brother.com/ips
Brother support web site http://support.brother.com
(File Explorer) icon on the taskbar, and then go to Computer.)
Wireless Network Connection
Press the WiFi button on your machine.
)
®
For USB Connection
For Wired Network Connection
Connect a network cable first.
For Wireless Network Connection
We recommend preparing a USB cable
to use temporarily during the wireless
setup.
[Recommended]
Select this option if you have a USB cable to
use temporarily for wireless setup.
Select this option if you do not have a USB cable.
For Network Users: Important Notice for Network Security
The default Web Based Management password is located on the back of the machine and marked "Pwd".
We recommend immediately changing the default password to use network tools/utilities securely and to
protect your machine from unauthorized access.
Wireless setup is now complete.
NOTE:
Before you can use your machine with your mobile device, download
"Brother iPrint&Scan."
Follow the on-screen
instructions until the
Connection Type screen
appears.
Follow the on-screen
instructions to continue
installation.
NOTE:
If connection is unsuccessful, repeat this step.
NOTE:
If connection is unsuccessful, repeat this step.
Follow the on-screen
instructions to continue
installation.
without CD-ROM drive or Macintosh)
®
6A Configuration using the CD-ROM
Finish
Finish