EnglisH
10
2
1
2
1
5
Put the shaving unit back onto the shaver.
Every two months: shaving heads
1
Switch off the shaver. Remove the mains plug
from the wall socket and pull the appliance plug
out of the shaver.
2
Press the release button (1) and remove the
shaving unit (2).
3
Turn the wheel anticlockwise (1) and remove
the retaining frame (2).
4
Remove the cutters and guards and clean them
with the cleaning brush supplied.
Note: Do not clean more than one cutter and guard
at a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it may take
several weeks before optimal shaving performance is
restored.
5
Clean the cutter with the short-bristled side of
the cleaning brush.
Brush carefully in the direction of the arrow.