Samsung SC7400 Series User Manual page 7

- USING THE BLOWER
Located on the left rear side of the cleaner.
1) Disconnect the hose from the body of the cleaner.
2) Connect the hose clamper to the blow hole.
Remote-control type (Optional)
- HOSE
1. Vacuum cleaner ON/OFF
Press the ON/OFF button to operate the vacuum
cleaner.
Press again to stop the vacuum cleaner.
2. Vacuum cleaner MIN/MID
Press the MIN/MID button to operate the vacuum at a
low level (for curtain cleaning, etc.).
Press again to operate the vacuum in a MID mode.
3. Using at MAX
Press the MAX button to operate the vacuum at
maximum intake.
- BODY
Press the power ON/OFF button repeatedly to start
and to stop the vacuum cleaner.
(OFF→ON→OFF)
If the remote handle control is not working,
the cleaner can be operated using the ON/OFF button
on the body of the machine.
The ON/OFF button operates the vacuum cleanner or stops it.
The INFRARED light indicates the part that receives the infra-red signal from the
handle control.
sender
Handle Control
The cleaner is controlled by using
infrared signals.
operating the cleaner _07