Drain snake with cable-drive locking feed system (21 pages)
Summary of Contents for Milwaukee M18 FUEL FMTIWP12
Page 1
OPERATOR'S MANUAL Cat. No. M18 FMTIWP12, M18 FMTIWF12 M18™ FUEL™ MID-TORQUE IMPACT WRENCHES WARNING To reduce the risk of injury, user must read and understand operator's manual.
Remove any adjusting key or wrench before GENERAL POWER TOOL turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may Read all safety warnings, instruc- WARNING result in personal injury. Do not overreach.
Other sockets and accessories might shatter or break causing injury. • Maintain labels and nameplates. These carry important information. If unreadable or missing, ® contact a MILWAUKEE service facility for a replacement. • Some dust created by power sanding, WARNING...
ASSEMBLY Drive Control Recharge only with the charger WARNING Button Mode Mode manual supplied with your charger and battery. Indicator Indicators Removing/Inserting the Battery To remove the battery, push in the release buttons Using the Control Switch and pull the battery pack away from the tool. The control switch may be set to three positions: Always remove battery pack before WARNING...
After six months to one year, depending on use, return the ® tool, battery pack and charger to a MILWAUKEE service facility for inspection. If the tool does not start or operate at full power with a fully charged battery pack, clean the contacts on the battery pack.
Page 8
SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty ® . Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...