Simple Operation; Error Messages - Topcom WG-2491 User Manual

3 Description
1
1. LCD display
2. ON/OFF-button
3. UNIT-button
4. HOLD-button
5. TARA-button
4

Simple operation

• Press the ON/OFF - button (2). The LCD display will show all segments for 2 seconds before
entering weight mode.
• Press the UNIT - button (3) to select 'Kilogram (kg)', 'Ounce (oz)' or 'Pound (lb)'
• Gently place the baby on the pan.
• The babies weight (maximum 20Kg) flashes on the display after a few seconds.
• During weigh you could use the HOLD - button (4), this button allows you to hold the weight. You
could use this function when the baby keeps moving.
If you use a towl to lay the baby on, it should be placed on the pan before switching
on. If you forgot to do so, press the ON/OFF - button to eliminate the weight of the
towl immediatelly after you have layed down the towl.
If you remove the towl, the scale will display a negative reading.
• Press the ON/OFF - button (2) for a few seconds to turn the scale Off or it will turn off automatically
in idle mode after 20 seconds.
5

Error messages

Lo Low power - Replace the batteries
O-Ld
Overload. The weight of the baby is over 20kg.
6 Cleaning
Clean the scale with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or
abrasive solvents.
TOPCOM WG-2491
3
4
5
2
7