Advertisement
POWER & CHARGING
Requires a Micro-USB to USB cable (included).
When the unit is charging, the LED indicator on the front of the unit will display
solid red. When the unit is fully charged, the LED indicator will turn off.
1.
Using a Micro-USB to USB cable (included), connect the larger USB
the USB
port of a powered on computer or USB power adaptor (included).
Connect the smaller Micro-USB plug into the Micro-USB
2.
The unit will now charge.
Note: Be sure the computer is not in sleep mode.
Use AC/DC Power Adapter to Charge
Use PC to Charge
INTERNATIONAL SUPPORT
To download this User's Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit
the support section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas
frecuentes, visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l'utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des
questions fréquemment posées, consultez la rubrique d'assistance sur: www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User's Guide, go to www.iLiveElectronics.com
Customer Service: 1-888-999-4215 | Email Support: prodinfo@dpiinc.com | Email
Copyright © 2015 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property
of their respective owners. Specifications are subject to change without notice.
BLUETOOTH
Pairing to a Device and Playing Audio
1.
plug to
2.
port of the unit.
3. Press and hold the Pair button.
4. Using the controls on your Bluetooth device, scan for and select ISB485 in
5.
6. Use the controls on the connected device or the unit to select and play
7. Audio played through the connected Bluetooth device will now be heard
POWER
DC IN
AUX IN
ON
OFF
AUX IN
Using Aux In (3.5mm Audio Input)
Requires a 3.5mm audio cable (included).
1. Connect a 3.5mm audio cable to the Aux In Input on the rear of the unit and
2. The unit will automatically detect the input and switch to
3. Use the controls on the connected device or the unit to select and play
POWER
DC IN
AUX IN
ON
OFF
Power on the unit by sliding the Power
ON position.
This unit's default mode after being powered on is Bluetooth
This is indicated by a flashing blue LED light on the front of the unit.
The blue LED light will begin to flash quickly. When pairing, remain within 3 feet
of the unit.
your Bluetooth settings to pair. If your device requests a password, enter the
default password 0 0 0
0 .
Refer to the user's manual for your specific device for instructions on pairing
and connecting Bluetooth devices.
When successfully paired, the blue LED
audio, and adjust the volume.
through the speaker.
After initial pairing, the unit will stay paired unless unpaired manually by
the user or erased due to a reset of the device.
unpaired or you find it is unable to connect, repeat the above steps.
the audio output/headphone
This is indicated by a solid blue LED light on the front of the unit.
audio, and adjust the volume.
Parts: partsinfo@dpiinc.com
Switch on the rear to the
Mode.
light will turn solid.
If your device should become
jack on a media player.
Aux In
POWER
DC IN
AUX IN
ON
OFF
Mode.
Advertisement
