Download Print this page
iLive ISB485REIBR User Manual
iLive ISB485REIBR User Manual

iLive ISB485REIBR User Manual

Wireless reindeer speaker

Advertisement

Quick Links

Wireless Reindeer Speaker
User's Guide for Model ISB485REIBR v1436-01
FCC Warnings
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FEATURES & CONTROLS
FEATURES
• Motorized mouth and body sing and dance
along to music
• Supports Bluetooth and automatic
device reconnecting
• Wireless range: 33 ft.
• Built-in microphone for hands free
speakerphone operation
Front View
Function Mode Status Indicator
Flashing Blue: Pairing Bluetooth
Solid Blue: Successfully Paired
Solid Blue : Aux In
Additional Warnings and Precautions
• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according
to state and local guidelines. They should never be disposed of in normal household waste, and they should
never be incinerated, as they might explode. Contact your local government for disposal or recycling practices
in your area.
• Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
• Batteries should be recycled or disposed of as per state and local guidelines.
• This product contains sensitive electronic components, and should not be handled as a toy.
• Machine washing is not recommended for this product.
• Aux In (3.5 mm audio input)
• Micro-USB port for battery recharge
• AC/DC power adapter (included)
• Built-in rechargeable lithium ion battery
• Battery life: approx. 4 hours at 50% volume
Battery Charging Status Indicator
Flashing Red: Low Battery
Solid Red: Battery Charging
No Light: Full Charge
Includes
• Micro-USB to USB charging cable
• AC/DC Power adapter
• 3.5mm Audio Input cable
Play/Pause/Speakerphone
Press to play or pause an audio track.
Press to answer an incoming call.
Vol − /+/Skip Rev/Fwd
Press to skip ahead or back an audio track.
Press and hold to set the volume level.
Pair
Press and hold to pair to a wireless device.

Advertisement

loading

Summary of Contents for iLive ISB485REIBR

  • Page 1 Wireless Reindeer Speaker User’s Guide for Model ISB485REIBR v1436-01 FCC Warnings Additional Warnings and Precautions Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance • Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according could void the user’s authority to operate the equipment.
  • Page 2 POWER & CHARGING BLUETOOTH Pairing to a Device and Playing Audio Requires a Micro-USB to USB cable (included). When the unit is charging, the LED indicator on the front of the unit will display Switch on the rear to the Power on the unit by sliding the Power solid red. When the unit is fully charged, the LED indicator will turn off. ON position. Using a Micro-USB to USB cable (included), connect the larger USB plug to Mode. This unit’s default mode after being powered on is Bluetooth the USB port of a powered on computer or USB power adaptor (included). This is indicated by a flashing blue LED light on the front of the unit. Connect the smaller Micro-USB plug into the Micro-USB port of the unit.