Page 1
Aux In Requires a 3.5mm cable (included). 1. Connect the included 3.5mm cable to the Aux in port on the speaker. You will hear “Auxiliary” and the Indicator Light will flash slowly when the unit is ready. 2. Plug the other end into audio output/headphone jack on a media player.
Page 2
LED Lantern 1. To use the lantern light, use 2 fingers to gently tap the lantern sensor or tap the top of the lantern. 2. Tap once for high setting, twice for medium, three times for low and four times to turn the light off.
ADDITIONAL WARNINGS • WARNING: To prevent fire or shock hazards, do not expose this unit to rain or moisture. • WARNING : Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable. •...
International Support To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com Para descargar este Manual del Usuario en Inglés, Español y Francés, o para obtener respuestas a preguntas frecuentes, visite la sección de apoyo en: www.iLiveElectronics.com Pour télécharger ce guide de l’utilisateur en Anglais,...
Page 6
Portable Touch Light Wireless Speaker User’s Guide for Model ISB210 v2463-01...
Page 7
Features • Supports Bluetooth • Party Plus Mode • Wireless range: 33 ft. • Built-in microphone for hands free speakerphone • Voice prompts announce speaker functions • Micro-USB port for battery recharge • DC battery power: built-in rechargeable battery • Battery life: approx. 9 hrs at 50% volume (light off ) Includes •...
Battery Power Charge fully before use. The charge time is approximately 3 hours. When the unit is charging, the Charging Indicator Light will display a solid red light. When charging is complete, the indicator will turn green. Using a Micro- USB to USB cable (included), connect the DC power input on the speaker to the USB port of a powered on computer or USB power adaptor (not included) to charge the speaker.
Page 11
Light will flash white, this means the speaker is ready to pair. 2. Using the controls on your Bluetooth device, select ISB210 in the Bluetooth settings to pair. A voice will announce “Bluetooth is connected, ” and the light will turn solid white when the speaker is successfully paired to your device.
Page 12
2 speakers are paired. Note: this is now the dominant speaker. 4. Pair your device to ISB210 and audio can now be heard on both speakers. 5. To disconnect from Party Plus Mode, Press the POWER button on one of the speakers.