Table of Contents
Advertisement
OPERATING THE PRODUCT
1. Install the battery pack. Make
sure that the latches on the
battery pack snap in place.
2. Press the trigger to build up
pressure and release mist.
NOTE: Twist the nozzle to adjust
the flow rate.
WARNING: Do not adjust the
nozzle while pressing the trigger.
This can force extra liquid to be
dispersed, and can cause damage
to the product. Release the trigger
and wait 1-2 seconds before
adjusting the nozzle.
NOTE: Press the electrostatic on/
off button to activate or deactivate
the electostatic function.
3. Release the trigger to stop the
product.
WARNING: Do not use corrosive
fluids,
conductive
chemicals that contain alcohol,
such as alcohol-based sanitisers,
sulfurs, bleach or bleach-based
products, industrial chemicals, and
seawater.
1
2
fluids,
or
3
2
1
LOW
MED
HIGH
Operation
1
9
Advertisement
Table of Contents
