D-Link DCS-6511 Quick Installation Manual page 9

General Connection Using 12 V DC Power Adapter
1. Connect the network camera to a hub via an Ethernet cable.
2. Connect the supplied power cable from the camera to a power outlet.
General Connection Using 24 V AC Power Wiring
1. Connect the network camera to a hub via an Ethernet cable.
2. Connect the supplied power cable from the camera to a power source such as your
building's emergency power.
Connection with a PoE Hub
If you are using a PoE hub, connect the IP camera to the hub via an Ethernet cable,
which will provide transmission of both power and data over a single cable.
D-Link DCS-6511 Quick Install Guide
DCS-6511_A1_QIG_v1.00(EU).indd 7
7
2010/10/13 上午 11:19:58