Table of Contents
Advertisement
Question
No.
Answer
Why has the electricity charge suddenly increased even though the use is the same as in the past?
One of the reason could be that some tenants have moved out. The electricity charge is apportioned
between blocks. When the number of blocks decreases or increases by moving in and out of tenants, the
21.
electricity charge increases and decreases. As an example, if the basic charge is set so that it is equally
apportioned between the blocks, then the electricity charges decreases if tenants move in and increases if
tenants move out. The building owners and managers should perform appropriate settings in accordance
with his/her policy as to how things should be in such cases.
Characters displayed on the screen are strange. What should I do?
22.
Region is not set.
Select "Clock, Language and region" category from the control panel and change from "Region".
When restarting the application, an error message "Failed to initialize UDP socket" appeared.
What should I do?
Open the "Initial Setting" screen and check that the IP address/Subnet Mask set to the PC is equal to
23.
those set in the "Initial Setting" screen.
If these are the same, then check that the LAN cable is connected from the PC to the hub correctly at both
ends.
Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
80
Advertisement
Table of Contents
