Table of Contents
Advertisement
If your computer supports one M.2 storage drive, install the drive into the M.2 storage drive slot 1. If your
computer supports two M.2 storage drives, install one drive into the M.2 storage drive slot 1 first and then
install the other into the slot 2. See "Parts on the system board" on page 4 for the locations of the slots.
1. Remove any media from the drives and turn off all connected devices and the computer.
2. Disconnect all power cords from electrical outlets and disconnect all cables that are connected to the
computer.
3. Remove the computer cover. For details, see "Computer cover" on page 57.
4. Remove the bottom cover. For details, see "Memory module" on page 75.
5. Replace the M.2 storage drive.
a. Unlock the M.2 storage drive clip.
Figure 68. Unlocking the M.2 storage drive clip
b. Remove the M.2 storage drive.
Figure 69. Removing the M.2 storage drive
78
P330 Tiny User Guide
Advertisement
Table of Contents
