Table of Contents
Advertisement
en Troubleshooting
Fault
Remnants of food on
tableware.
50
Cause and troubleshooting
Tableware is placed too close together or basket is
overfilled.
Arrange tableware with sufficient space in between.
1.
The spray jets must reach the surfaces of the table-
ware.
Avoid points of contact.
2.
Spray arm rotation of the lower spray arm is blocked.
Arrange tableware so that it does not obstruct
▶
spray arm rotation.
Spray arm nozzles are blocked.
Clean the Spray arms.
▶
Filters are soiled.
Clean the filters.
▶
→ "Cleaning filters", Page 43
Filters are inserted incorrectly and/or not engaged.
Insert the filters properly.
1.
→ "Filter system", Page 43
Engage the filters.
2.
Washing programme selected too weak.
Select a more intensive washing programme.
▶
→ "Programmes", Page 18
Adjust the sensitivity of the sensors.
▶
→ "Sensors", Page 11
Tableware has been precleaned too intensely. The
sensors chose a weaker programme. Stubborn soiling
cannot be entirely removed.
Only remove large remnants of food and do not
▶
prerinse tableware.
Advertisement
Table of Contents
