Siemens TP27 Equipment Manual page 93

Creating a new
data record
Editing a data
record
TP27, TP37 Equipment Manual
Release 01/00
Step
1 Touch the Recipe field of the standard screen Data Record
Processing and Transmission.
Select the recipe for the new data record in the selection window.
2 Touch the Data Medium field.
Select from the selection window the data medium on which you
want to save the new data record.
3 Touch the Data Record Name field.
Enter the name of a data record, which does not yet exist, in the
input window . To save the data record on a disk, the name may
only consist of alpha characters and digits from the normal level of
the alphanumeric keyboard. The length is limited to 11 characters.
4 Edit the data record and then download it to the data medium.
Step
1 Touch the Recipe field in the standard screen Data Record
Processing and Transmission.
Select the recipe for the data record to be edited from the selection
window.
2 Touch the Data Medium field.
Select the data medium from the selection window on which the
edited data record should be saved .
3 Select the name of the data record which you which to edit. There
are two ways of doing this:
Touch the button
and select the data record from the selection window or
Touch the Data Record Name field and enter the name of the
data record in the input window.
4 Touch the button
5 Edit the data record in the edit window (figure 8-4).
6 Confirm the change by touching
or discard the change by touching
Action
Action
ESC
Recipes
8-9