Table of Contents
Advertisement
Password
Automatic call
If a password level higher than the current one is required for a button or an
input field, the Touch Panel automatically requests the entry of an appropriate
password beforehand.
Logout
If the Touch Panel screen is not touched within a configured time, the current
password level is automatically reset to zero. This means that unauthorized
persons cannot gain access while the Touch Panel is unattended.
Itb is also possible to log out from the Touch Panel by using the Password
Processing standard screen. Carry out the following steps to do this:
Logging off on
standard screen
5-4
Step
Action
1
Call the standard screen Pass-
word Processing.
2
Touch the Login input field.
3
Enter an invalid password and
confirm by pressing
Result
The standard screen is displayed
(figure 5-1).
The password input window
opens (figure 5-2).
Once it has been applied, the ef-
fective current password level is
0.
TP27, TP37 Equipment Manual
Release 01/00
Advertisement
Table of Contents
