Table of Contents
Advertisement
Mounting the Kit to the Rear Engine Guard
1.
Secure the mount assembly to the rear upper guard using 2 bolts (5/16 x 1 inch) and 2 nuts (5/16 inch)
as shown in
Figure 13
2.
Tighten the fasteners securing the upper mount to the main bracket.
3.
Secure the bottom of the main bracket to the rear engine guard using 1 carriage bolt (5/16 x 7/8 inch) and
1 nut (5/16 inch) as shown in
Mounting the kit to the left side of the rear engine guard (roll bar not shown for clarity)
1. Carriage bolt (5/16 x 7/8 inch)
2. Rear upper guard
Mounting the kit to the right side of the rear engine guard (roll bar not shown for clarity)
1. Carriage bolt (5/16 x 7/8 inch)
2. Rear upper guard
or
Figure
14.
Figure 13
or
Figure
Figure 13
3. Rear engine guard
4. Bolt (5/16 x 1 inch)
Figure 14
3. Rear engine guard
4. Bolt (5/16 x 1 inch)
14.
5. Nut (5/16 inch)
6. Mount assembly
5. Nut (5/16 inch)
6. Mount assembly
9
g213966
g213967
Advertisement
Table of Contents
