Philips AWH1620/51(30YC) User Manual page 14

Exploitation
1
2
3
4
5
11 12
Turning on the water heater
1 Open one of the hot water outlet valves,
then open the cold water supply valve The
electric water heater will begin to fill with
water. When water flows freely from the
hot water tap, this means that the water
heater is completely filled with water and
the hot water outlet tap can be closed
2 Insert the electrical plug into the socket
3. Press the «On/Off» button on the control
panel The screen will display the actual
water temperature, power level, set
temperature, operation mode and time
Attention!
During normal operation, the cold water
supply tap must be set to the «open»
position
12
6 7 8
13 14 15
fig
6
1 Tank water temperature indicator
2 Set water temperature indicator
3 Time
4 Power mode indicator
5 ECO mode indicator
6 Turbo mode indicator
7 Heating indicator
9
8 Warm indicator
10
9 Timer indicator
10 Time indicator
11 Power mode selection button
12 Button to increase temperature and
time during related settings
13 Water heater on/off button
14 Button to decrease temperature and
time during related settings
15 Operation mode/time setting button
Temperature setting
After turning on the water heater, press
button or
temperature Selection range from 35 to 75 °C
Power mode selection
To select the power mode, press the
«Set» button and select one of the heater
heating power modes:
1 - low (800 W)
2 - medium (1200 W)
3 - intensive (2000 W)
to adjust the desired water