Advertisement
PTT3 Power Tugger
4
I. Important Precautions
Read the following safety precautions before operating or servicing your equipment.
Follow correct lockout/tagout procedures.
Prevent personnel from leaning on equipment and containers or placing their arms, hands, legs or
any bodily member in pinch-point areas throughout the system.
Instruct personnel on the proper placement of product on the equipment. Failure to place containers
or loads in the engineered locations may hinder the operation of the equipment or cause structural
damage.
Never walk or climb into or onto the product while it is in motion.
Never alter the equipment in any way unless authorized by a qualified employee of Align.
Thoroughly read the manual and understand how to use the PTT3.
The operator should wear protective footwear at all times.
Keep the floors clean and smooth for efficient operation.
Keep the weight on the drive wheel while moving a load.
When driving the PTT3, try not to create any sudden stops / changes in direction.
Stop the unit slowly with the accelerator rather than letting go of the handle.
Advertisement
