Advertisement
SETTING UP YOUR OVEN
Turntable Installation
Cleaning the cooking compartment and putting the turntable in place.
For new installations, make sure all packaging and shipping tape has been removed
from the turntable shaft. Before using the appliance to prepare food for the rst
time, you will need to put the turntable in place correctly. You must clean the
cooking compartment and accessories.
1
2
Note：
1. Never use the appliance without the turntable. Make sure that it is properly
engaged. The turntable can turn clockwise or anti-clockwise.
2. Never place the glass tray upside down. The glass tray should never be restricted.
3. Both glass tray and turntable ring assembly must always be used during cooking.
4. All food and containers of food are always placed on the glass tray for cooking.
5. Never restrict the movement of the turntable.
6. If glass tray or turntable ring assembly cracks or breaks, contact your nearest
authorized service center.
How to put the turntable in place:
1. Place the turntable ring assembly ③ into
the recess in the cooking compartment.
2. Place the glass tray ① on the turntable
ring assembly ③. Fit the raised, curved
lines in the center of the glass tray
bottom between the three spokes of the
shaft. Make sure that the glass tray ①
engages in the turntable shaft ② in the
3
centre of the cooking compartment oor.
The rollers on the shaft should t inside
the turntable bottom ridge.
EN-12
INSTRUCTION FOR USE
Advertisement
