Subscribe to Our Youtube Channel
Related Manuals for emmeti Merriott Primo Plus E-A
Summary of Contents for emmeti Merriott Primo Plus E-A
- Page 1 Installation, operating & instruction manual Primo Plus E-A Electric Radiator Class I - 230V - 50Hz PLEASE LEAVE THIS MANUAL WITH THE END USER...
-
Page 2: Table Of Contents
Contents Warnings & Safety Information General Information Warranty Installation Maintenance, Repair & Disposal Waste Disposal According to The WEEE Directive (2012/19/EU) Operation 7.1 Stand-alone Radiator 7.2 Radiator Connected to a Touch4 Central Programmer 7.3 Other Functions Parameter Menu 8.1 How to Enter the Parameter Menu 8.2 How to Exit the Parameter Menu 8.3 Functions Available in the Parameter Menu 8.3.1 Check and Set Time... -
Page 3: Warnings & Safety Information
Primo Plus E-A Warnings & Safety Information SAFETY INFORMATION Children of less than 3 years should be kept This appliance can be away from the unit unless used by children aged continuously supervised. from 8 years and above and persons with reduced Children aged from 3 years physical, sensory or mental and less than 8 years shall... - Page 4 Primo Plus E-A Warnings & Safety Information (cont...) CAUTION For the correct installation of radiators it is essential that the fixing of the radiator is carried Some parts of this out in such a way that it is suitable for intended use AND predictable misuse.
-
Page 5: General Information
Primo Plus E-A General Information > > This appliance is a sealed electric radiator This appliance complies with the European designed for fixed wall-mounted installation. Directive 2014/30/EU (CE Marking on all appliances). > This appliance conforms to the standards > EN 60335-1 and EN 60335-2-30. -
Page 6: Installation
Primo Plus E-A Installation Positioning > The radiator must be positioned horizontally, the right way up on the wall in order for it to function correctly. Never switch the radiator Min. 100mm Min. 100mm on in any other position as this will damage the electrical element. -
Page 7: Maintenance, Repair & Disposal
Primo Plus E-A Installation (cont...) Primo Plus E-A Double Panel (refer to figure 2) Height (mm) Length 1000 1250 1300 1600 2000 (mm) 1016 1320 1727 Stand-alone Connection SUPPLY > The electrical installation must comply with NEUTRAL LIVE EARTH local or national regulations. Switched >... -
Page 8: Waste Disposal According To The Weee Directive (2012/19/Eu)
Primo Plus E-A Waste Disposal According to The WEEE Directive (2012/19/EU) Waste disposal according to the negative effects on the environment and health to WEEE Directive (2012/19/EU). which the product can contribute if it is disposed The symbol on the product label of as ordinary domestic waste. -
Page 9: Stand-Alone Radiator
Primo Plus E-A Operation (cont...) 7.1 Stand-alone Radiator 7.2 Radiator Connected to a Touch4 Central Programmer > Select one of the following operating modes using dial D (figure 6): > When connected to a central programmer (refer to page 17), select the automatic Comfort Mode operation mode by turning dial “D”... - Page 10 Primo Plus E-A Operation (cont...) Led A and C ~ 90°C MAX ~ 75°C MAX ~ 60°C MAX Led A Blinking Note: When considering the permanent use of the Orange De-activate Key lock active key lock Led C Blinking radiator at 60°C or 75°C maximum, the following Orange correction factor should be applied for the output.
-
Page 11: Parameter Menu
Primo Plus E-A Parameter Menu 8.1 How to Enter the Parameter Menu The thermostat has a parameter menu. In order to enter this menu, follow the below steps:- > Slide switch E to then back to Note: LED A & C will both flash green while in the top level of the parameter menu. -
Page 12: Functions Available In The Parameter Menu
Primo Plus E-A Parameter Menu (cont...) 8.3 Functions Available in the 8.3.1 Check and Set Time Parameter Menu To enter into this function, follow the below steps:- When in the top level of the parameter menu, the below functions can be accessed:- Symbol Parameter Function No function... -
Page 13: Setting The Time
Primo Plus E-A Parameter Menu (cont...) 8.3.3 Setting the Time > > To set the time, rotate dial B to the current time Rotate dial D to the day of the week that is to be checked. and rotate dial D to the current day of the week. >... - Page 14 Primo Plus E-A Parameter Menu (cont...) > LED A will be off. > LED C will stop flashing green and change to flashing orange/green, indicating that dial D must now be set to Day 1. Note: The time template, located in the rear of the user manual, will be needed to set the day and time.
-
Page 15: Select Additional Features
Primo Plus E-A Parameter Menu (cont...) > To return to previous mode, turn Dial B or D and LED C will start flashing orange/green, indicating then turn it back to the original position. If no that dial D must now be set to Day 2. manual intervention has been detected within >... -
Page 16: Select Programmes
Primo Plus E-A Parameter Menu (cont...) > or -3,5 and then slide Rotate dial D to Symbol Programme Number switch E to then back to to confirm. > LED A will change to solid green to indicate the currently selected option. 8.3.7 Select Programmes -3,5 The thermostat has 6 preset heating... -
Page 17: Radiator Connected To The Touch4 Programmer
Primo Plus E-A Radiator Connected to the Touch4 Programmer Wire Colours PILOT WIRE FROM PROGRAMMER BR = Brown (switched live) BK = Black BL = Blue Mark switched live G/Y = Green/Yellow Hz SUPPLY pilot wire with brown insulation tape EARTH NEUTRAL LIVE... - Page 18 Primo Plus E-A Radiator Connected to the Touch4 Programmer (cont...) Touch Wire Colours BR = Brown BK = Black BL = Blue G/Y = Green/Yellow Other products in Zone Other products in Zone Zone Zone Other products in Zone Other products in Zone Zone Zone...
-
Page 19: Technical Characteristics
Primo Plus E-A Technical Characteristics 10.0 Environment: - Operating temperature -30°C to +50°C - Transportation and storage temperature -30°C to +70°C Ranges for temperature settings: - Comfort mode +5°C to +30°C - Reduced mode Temp reduction between -3.5°C and -15°C - Frost protection mode +7°C Electrical Insulation... -
Page 20: Preset Programmes
Primo Plus E-A Preset Programmes 11.0 0h 1 2 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 0h 1 2 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 0h 1 2 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 0h 1 2... -
Page 21: Eco Directive Characteristics
Primo Plus E-A Eco Directive Characteristics 12.0 Model identifier(s): PPEAxxxxxxx where “x” may be any character. Item Symbol Value Unit Heat output Nominal heat output where “xxxxxx” = 3000500 P nom 0.50 or 5000400 Nominal heat output where “xxxxxx” = 3000800 P nom 0.75 or 5000500... - Page 22 Primo Plus E-A Eco Directive Characteristics 12.0 (cont...) Item Unit Type of heat input, for electric storage local space heaters only Manual heat charge control with integrated thermostat N.A. Manual heat charge control with room and/or outdoor N.A. temperature feedback Electronic heat charge control with room and/or outdoor N.A.
-
Page 23: Parameter Menu Template
Primo Plus E-A 23 Parameter Menu Template 13.0... - Page 24 Merriott UK & Ireland Purmo Group (UK) Ltd, Eastern Avenue, Team Valley, Gateshead, Tyne & Wear NE11 0PG Tel: 0330 0415 472 sales@merriottuk.com sales@merriott.ie www.merriottuk.com / www.merriott.ie Follow us on @MerriottUK and...
Need help?
Do you have a question about the Merriott Primo Plus E-A and is the answer not in the manual?
Questions and answers