Table of Contents
Advertisement
4. Press the up/down arrow buttons to
select
, and press the
right arrow button to enter the menu.
5. Press the down arrow button select
[Custom Settings] and press the
button or the right arrow button to
enter the menu.
6. Select [Yes] to save or [No] to cancel.
36
36
7. Turn the Mode dial to switch to the
button or
custom settings (
8. The photo settings you stored the last
time are used.
).
When
mode is used for the first
time, there is no preset parameter
stored in the mode.
Under the
mode, you need to
save or modify the set parameters
(except the parameters in
restart or all modes. Please enter the
[Custom Settings] menu and select
[Yes] after setup. Otherwise, the
parameter settings will not be saved
in the case of switching the camera
on/off or in mode switching.
If you want to remove the parameter
setting in [Custom Settings], please
see the reset function instructions
on page 80 to change.
) in
Advertisement
Table of Contents
