KODAK PHOTO GEAR MONOPOD with Remote 72"/182 Manual

SAFETY PRECAUTIONS

1. 
   CHOKING HAZARD – Small parts. This product contains small parts and is not suitable for children under 3 years old.
2. Remove all packaging before using this device. Please keep all packaging materials out of reach of children and pets.
3. Properly dispose of all packing materials immediately after unpacking product, as the bags used for packaging could present a suffocation or choking hazard.
4. Read all instructions carefully before attempting to operate this device. Improper usage could result in a reduction in efficacy.
5. Please take care when extending and folding this unit to avoid damage through rough handling.
6. Ensure that all knobs, latches, and levers are in their fully locked positions before using this unit with a camera.
7. Do not attempt to move this unit while the camera is attached. First, take the camera off, then move the unit before replacing the camera.
8. Do not attempt to oil or lubricate any of the parts of the monopod. Doing so may cause damage and void the warranty.
9. Do not store this unit in environments with high temperatures.
10. Do not use during lightning storms.
11. Do not sit or ride on the monopod or allow others to do so, as this may cause injuries as well as damage to the product.
12. Do not use harsh chemicals for cleaning this product; use only a mild detergent and soft cloth, and dry well before storing.

PACKAGE CONTENTS

• 72" / 182 cm Monopod
• Wrist Strap
• 1/4" to 3/8" (0.6 cm to 0.95 cm) Screw Adapter
• Smartphone Adapter
• Carrying Case
• Access to free KODAK Tripod/Monopod E-Guide
• User Guide

ABOUT THE DEVICE

• Lightweight monopod is highly portable and easy to use
• 4-section body is fully adjustable
• 1/4" to 3/8" (0.6 cm to 0.95 cm) screw adapter and smartphone adapter for versatile use
• Telescoping, flip lock system allows for a wide range of heights
• Sturdy yet lightweight aluminum and nylon construction keeps your camera or smartphone secure
• Rubberized foot keeps the monopod safely in place
• Retractable turf spike for secure all-terrain footing

PRODUCT OVERVIEW

1. 1/4_" to 3/8_" (0.6 cm to 0.95 cm) screw adapter
2. Neoprene grip
3. Flip-type leg locks
4. Rubber foot
   (with retractable turf spike, not pictured)
5. Wrist strap
6. Smartphone adapter

Adjustable Body

1. Unlatch the leg locks at the bottom of the leg.
   
2. Pull out the sections of the body until it reaches your desired length.
   
3. Re-latch the locks once you have the body configured as you wish.
   

Turf Spike

1. For use on grass or other unstable surfaces, turn the rubber tipto the right until it stops.
   
2. The turf spike will now be visible.
   
3. To retract the turf spike, turn the rubber tip to the left until it stops and the turf spike is no longer visible.
   
4. Use caution when deploying the turf spike as it can damage some surfaces.

Wrist Strap

1. We recommend using the included wrist strap any time you use your monopod, to provide extra protection for your camera or smartphone.
   
2. Attach the strap by threading the connector through the loop on the top end of the monopod.
   
3. Slide your hand through the wrist strap, then twist your arm, so that the strap is taut while you're holding the monopod.

Mounting a Camera

1. Align the screw adapter with the corresponding threading on your camera.
   
2. Holding the camera in one hand, rotate the monopod to the right until it is securely attached to the camera.
   
3. To remove your camera, hold it in one hand and rotate the monopod to the left until it is no longer attached.
   

Mounting a Smartphone

1. Align the screw adapter with the corresponding threading on the smartphone adapter.
   
2. Holding the smartphone adapter in one hand, rotate the monopod to the right until it is securely attached to the adapter.
   
3. You may now pull up on the smartphone adapter clamp and insert your smartphone in landscape mode.
   
4. To remove the smartphone adapter, hold it in one hand and rotate the monopod to the left until it is no longer attached.
   

TECHNICAL SPECIFICATIONS

Materials: Aluminum / Nylon
Maximum Height: 72_" (183 cm)
Minimum Height: 21_" (55 cm)
Folded Length: 21_" (55 cm)
Weight Capacity: 6.6 lbs (2.9 kg)
Monopod Weight: 0.8 lbs (0.3 kg

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download KODAK PHOTO GEAR MONOPOD with Remote 72"/182 Manual