Drain Connections - Bosch 800 Series Installation Instructions Manual

Drain Connections

The dishwasher drain hose may be connected to the house-
hold or field drain plumbing in one of four ways. You will need
a 1¼" diameter hole in order to pass the drain hose through
the cabinet.
1 Directly under the sink dishwasher drain connection, as
shown in Figure 9.
2 Directly to a disposer dishwasher drain connection, as
shown in Figure 10.
3 To the under sink dishwasher drain connection through
an air gap, as shown in Figure 11.
4 To a disposer dishwasher drain connection through an air
gap, as shown on Figure 12.
IMPORTANT NOTES:
· If local ordinance require an air gap, install it according
to the manufacturer's instructions.
· If the dishwasher drain hose is to be connected to a
disposer dishwasher drain connection, remove the plug
from the disposer's dishwasher drain connection.
· The dishwasher drain hose must have one place along
its length that is securely attached 20" (508 mm) above
the cabinet floor.
· The drain hose length can be extended if necessary. The
maximum length of the drain hose, including the hose
leading to the air gap, is 150" (3800 mm).
10
Figure 8
Figure 9
Non-Metallic Tie
MIN.
20"
G
Figure 11
G
Figure 10
Non-Metallic Tie
MIN.
20"
G
Figure 12
Remove
plug
G
10