Table of Contents
Advertisement
Power Adapter
Your notebook is supplied with a universal AC power adapter, which automatically
adjusts to the available power source. The following levels are supported:
AC 100-240V~/ 50-60 Hz. Please follow the power supply safety instructions
found on page 5.
The power adapter is connected via a power cord to an AC outlet. The DC power
lead from the power adapter is connected to the rear side of the notebook (21).
The adapter has an on and off switch. No electricity will be used and the notebook
will not be supplied with electricity if the on/off switch is set to OFF (0)
The adapter provides the notebook with power in the ON setting (1) and also
charges the battery. The power supply indicators of the notebook provide details
on the state of the battery. The battery is also being charged when you are working
on your notebook with the power adapter connected. The power adapter is still
receiving power even when your notebook is not connected to it. You should
therefore unplug the power adapter from the outlet if it is not connected to the
notebook or set the adapter to OFF (0).
Warning!
Use only the power adapter and power cord supplied with your
notebook.
Battery Operation
Note
Please charge and discharge the new battery completely two to three
times in succession, so that it will achieve its full performance!
Batteries store electrical energy in their cells and then deliver it when needed.
The useful life and performance of your battery depend on careful handling.
The battery should be completely discharged before a charging process and
completely charged again, in order to optimize its useful life and its performance.
You must also pay attention to the Safety Notes from page 8.
28
Power Supply
Advertisement
Table of Contents
