Selecting Sound Mode; Editing Programmes; Adjusting Audio Balance - LG TL43 Series Owner's Manual

To use Energy Saving feature
(Settings) → [Picture] →
Reduces power consumption by adjusting screen brightness.
• [Off] : Turns off the Energy Saving mode.
• [Minimum] / [Medium] / [Maximum] : Applies the pre-set Energy
Saving mode.
• [Screen Off] : Screen is turned off and only sound is played. Press
any button except Power button on the remote control to turn the
screen back on.
To use Picture Test
(Settings) → [Picture] → [Picture Test]
First of all, start the [Picture Test] to see whether the video signal
output is normal, and then select whether there is an error.
If there are no problems in the test, check the connected external device
or broadcast signal.

Selecting Sound Mode

(Settings) → [Sound] → [Sound Mode Settings] → [Sound Mode]
Adjusts TV audio to an optimal level based on a selected sound mode.
• [Standard] : Optimizes the sound for all types of content.
• [News] : Boosts voice clarity from the TV.
• [Music] : (Depending on model) Optimizes the sound for music.
• [Cinema] : Optimizes the sound for cinemas.
• [Soccer] : (Depending on model) Optimizes the sound for sports.
• [Game] : Optimizes the sound for gameplay.

Adjusting audio balance

(Settings) → [Sound] → [Sound Mode Settings] → [Balance]
Adjust the volume of the left and right speakers.
Using the Sound Effect function
(Settings) → [Sound] → [Sound Mode Settings]
The user can select various sound effects.
• [Treble] : Controls the dominant sounds in the output.
• [Bass] : Controls the softer sounds in the output.
• [Reset] : Reset the sound effect settings.
• This is only available if [Sound Mode] is set to [Standard].
12
[Energy Saving]
To set Auto Volume
(Settings) → [Sound] → [Auto Volume]
Sets [Auto Volume] to [On]. Varying volume output from programme to
programme is automatically adjusted for convenient TV watching when
clicking through different programme.
To use Sound Test
(Settings) → [Sound] → [Sound Test]
Start the [Sound Test] to check that the sound signal output is normal,
and then select whether there is an error.
If there are no problems in the test, check the connected external device
or broadcast signal.
Using Manual Tuning
(Settings) → [Programmes] → [Manual Tuning]
Adjusts programmes manually and saves the results.
For digital broadcasting, signal strength and signal quality can be
checked.
For analogue broadcasting, you can set up station names and use
fine tuning (except for Satellite mode). Normally fine tuning is only
necessary if reception is poor.

Editing programmes

(Settings) → [Programmes] → [Programme Manager]
Edits the saved programmes.
Set as favourite programme, block/unblock programme, skip
programme etc. of the selected programme.
To select Programme mode
(Settings) → [Programmes] → [Programme Mode]
(This feature is available on certain models only.)
This function allows you to watch a tuned programme in Antenna or
Cable.
• You can only watch programmes in the selected mode.