EN
Auto Switch Select
To easily select a switch in a function, such as a program mix,
roll with the scroll wheel to highlight the switch selection box, and
press the scroll wheel. The box around the switch should now
flash. To select a switch, toggle the switch you wish to select. Verify
the switch selection is now displayed as desired. When correct,
press the scroll wheel to complete the switch selection.
INTERNAL MEMORY
The internal memory may be accessed via the USB port on the
transmitter to enable the following tasks:
• Update Spektrum AirWare software in the transmitter
• Back up models for safe keeping
• Import/Export Color Palettes
EXTERNAL MEMORY CARD
Installing An External Memory Card
A micro memory card (not included) enables you to:
• Import (copy) models from any compatible* Spektrum
AirWare
transmitter
™
• Export (transfer) models to any Spektrum AirWare transmitter
• Update Spektrum AirWare software in the transmitter
• Back up models for safe keeping
To install or remove a Memory card:
1. Power OFF the transmitter.
2. Press the Memory card into the card opening with the card
label facing toward the back of the transmitter.
8
To connect to the internal memory:
1. Connect a USB C cable to your PC and the micro USB C port
on the back of the transmitter.
2. Power ON the transmitter, enter the system menu -> USB
storage, select Access Internal Storage, the NX7e will connect
to your PC.
3. Complete your file transfer(s).
4. Press the Back button or the roller to exit.
5. Disconnect the USB cable from your transmitter.
SPEKTRUM NX7e • TRANSMITTER INSTRUCTION MANUAL