Table of Contents
Advertisement
8
Prepare Live TV
Watching TV broadcasting
1
Connect the broadcast antenna/cable to the projector. You may also connect
a piece of equipment that can receive broadcasting such as a set-top box
instead of the antenna/cable. Press the
see the details, select
operating the
Device
2
Start the
(Q. Settings)
Tuning. Finds and adds only channels being broadcast.
Network Setting
Network Setting
If you configure settings for the network, you can use various services such as
online contents and applications.
Setting a Wired Network
1
Connect the LAN port of the projector and the router using a LAN cable. The
router should be connected to the Internet beforehand.
2
Press the
(Q. Settings) button on the remote control and select
Network
Wired Connection
connection.
•
If the router supports DHCP, the projector is automatically connected to the
network when you connect the projector to the network with a LAN cable.
Set-Top Box
from the device list that is displayed when
Connector.
Channels
(Ethernet). This will start the wired network
button on the remote control. To
Channel Tuning
Auto
Advertisement
Chapters
Table of Contents
